Weld It Yourself Link
$475.00 – $675.00
The GIANT Motorsports Weld It Yourself Link is made out of P&O mild so you can tig or MIG weld the two lower link arms.
The side plates are 3/16′, and the top plates are 1/8′.
The kit includes 1.75′ x .120 D.O.M. tube, the forward bushing sleeve, 1.25′ threaded sleeves for the rear, and 7/8 x .188 chrome-moly boss for two shock mounting locations on each arm.
The length between the center of the bushing to the center of the heim is 55′. The shock mounting locations divided are 1′ back from the center.
We have been racing and running these arms for years, with a 3′ king by-pass valved with extra compression to work without a hydraulic bump stop, putting all the force into the center of the arm testing the stress and have encounter zero problems.
The complete kit includes everything necessary to construct two lower link arms including instructions.
WIY truss & 4-link mounts to set up a stock 9″
Giant TT housing any width with semi ends welded on
Upper shock mounts Dome | Flat
For ordering
Call or text us today – 714-265-1450
[email protected]
| WIY Link | Link arm kit W/O hiems or bushing, Link arm W/O tubes, bungs, bosses or sleeves |
|---|
You may also like…
-
4-Link Pivots
$475.00Add to cartBolt on frame 3 or 4 link pivots works: All new Bolt on frame link pivots works with any open C channel frames, designed to be use with a 3 or 4 link application. $475.00 Weld It Yourself version. $350.00 This link shock mounts are a great starting point to making your own bed cage …
-
Truss & 4-Link Tab Kit for 9″ Axles
$425.00Add to cartTruss & 4-Link Tab Kit for 9″ Axles This kit has been redesigned for improved straight and easier assembly. 2 kits Available for offset housings with equal length axles or centered housings. Some fitting required to the truss. 63.5″ to W.M.S (housing centered) stock Ford 9″ 66″ or 69″ to W.M.S (housing off set) stock …
Related products
-
Link Shock Mounts Flat
$275.00Add to cartThis link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be used with a single coil over shock and ad the by-pass later or ready for both the first time. The (upper) flat top style pushes the tube 4.25″ more forward then the (lower) Dome …
-
Axle Truss
$550.00Select optionsWeld on axle truss with removable cover Keep you axle from bending or the tub coming lose from the center section with the truss system. To fit the truss plates to the axle. There is a lot of fitting to get the truss on a housing. –Preload the axle before welding by attaching a long …
-
Weld It Yourself 4-link frame pivots
$350.00Add to cartBolt on frame 3 or 4 link pivots works: All new Bolt on frame link pivots works with any open C channel frames, designed to be use with a 3 or 4 link application. This link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be …
-
Shackles – WIY – Toyota, S-10, Nissan, Explorer
$195.00Add to cartThis shackle is great for helping you mount 62” or pre-runner springs on Toyota, S-10, Nissan, explorer or any truck that came with the springs under the frame rail. $195. Includes parts to make a pair of 12” shackles and the frame mounts. For ordering Call or text us today – 714-265-1450 [email protected]