|
Equal Length I-Beam Kit WIY |
|
|
|
For $450. WIY Eq. beam kit includes:
-main beam plates
-end caps plates
-tear drop plates
-back layer plates
-front overlay
-1 ¼ threaded bungs
You will need to provide hiems, Dana 4WD ends, tubing and welding.
To construct these beams, you will need to set the width and ride height.
Cut Dana 4WD end just past threaded radius arm hole and cap with WIY plate. Cut and bend 1 ¾” tubing to match main plates. Bolt on beam pivots, hiem, bung, top beam tube and set desired width and ride height. Fit bottom tube and plate in and weld.
Never weld with hiem in bung and never thread hiem into bung until 100% cooled.
Here are other parts that will help you complete the beam kit if needed.
$225 Beam tub cut and bent
$550 Eq. beam pivots (welded)
$125 radius arm pivots (welded)
$250 WIY radius arm kit includes:
-Attaching plates
-Connecter plates
- 1 ¼ threaded bungs
Cut and bent tubing cost $150 extra.
Good level fab. skills required.
|
