Name: Solid Shock Co. 3.0" Internal Bypass Coil-Over
SKU: 977
Availability: InStock

Solid Shock Co. 3.0″ Internal Bypass Coil-Over

$2,150.00

Solid Shock Co. 3.0″ internal bypass coil-over shocks — no springs included. Custom-fitted and specified for your specific truck with progressive bump resistance for high-speed driving without bottoming out.

Custom-Specified Coil-Overs — Fitted to Your Truck

The Solid Shock Co. 3.0\” internal bypass coil-over is not an off-the-shelf shock with a spring rate picked from a chart — it is fitted and specifically configured for your truck. Valving, travel, and stroke are determined based on your vehicle and use case. The result is a coil-over tuned for your build, not a compromise spec that works adequately for a range of vehicles.

The internal bypass design provides progressive damping through the stroke — compliant for small bump absorption early in travel, with increasing damping as the shock approaches full compression. This is the behavior that makes a truck fast at speed without being harsh on the street.

Specifications

Diameter: 3.0\”
Type: Internal bypass coil-over
Springs: Not included — sourced separately
Fitment: Truck-specific (specify vehicle when ordering)

Springs Are Separate — Intentionally

Spring rate is application-specific in ways that bypass shock valving is not. Your truck weight, travel, and use case all drive spring selection. Running the wrong spring rate on a correctly valved bypass shock shows up as either excessive body roll (too soft) or inability to achieve full droop (too stiff). Source springs that match your loaded truck weight and intended travel.

Ordering

Call or text 714-265-1450 with your vehicle, planned front travel, coilover mounting position, and primary use case (street, trail, desert race, or endurance race). Solid Shock Co. shocks are built to order — get the lead time before planning your build schedule.