Category
Bolt on frame 3 or 4 link pivots works:
All new Bolt on frame link pivots works with any open C channel frames,
designed to be use with a 3 or 4 link application.
This link shock mounts are a great starting point to making your own
bed cage with linking your truck. Can be used with a single coil over
For ordering
Call or text us today – 714-265-1450
[email protected]
Related products
-
Lower link tabs
$185.00Add to cartWIY Lower link tabs and overlay will fit on to any axle diameter, link arm and placement. For ordering Call or text us today – 714-265-1450 [email protected]
-
Axle Truss
$550.00Select optionsWeld on axle truss with removable cover Keep you axle from bending or the tub coming lose from the center section with the truss system. To fit the truss plates to the axle. There is a lot of fitting to get the truss on a housing. –Preload the axle before welding by attaching a long …
-
Equal Length I-Beam Kit
$450.00Add to cartWeld It yourself equal length beam kit includes: Main beam plates End caps plates Tear drop plate Back layer plates Front overlay 1 ¼ threaded bungs You will need to provide hiems, Dana 4WD ends, tubing and welding. To construct these beams, you will need to set the width and ride height. Cut Dana 4WD end …
-
Truss & 4-Link Tab Kit for 9″ Axles
$425.00Add to cartTruss & 4-Link Tab Kit for 9″ Axles This kit has been redesigned for improved straight and easier assembly. 2 kits Available for offset housings with equal length axles or centered housings. Some fitting required to the truss. 63.5″ to W.M.S (housing centered) stock Ford 9″ 66″ or 69″ to W.M.S (housing off set) stock …